!!!Accessing Memory

[{TableOfContents }]

!!Reading Memory locations

In Basic, we use PEEK(addr) to read a memory location. This example read the first joystick

{{{
...
100 STICK = PEEK(632)
110 IF STICK = 15 THEN PRINT "centered"
120 IF STICK = 14 THEN PRINT "up"
130 IF STICK = 13 THEN PRINT "down"
...
}}}

In Forth, there are two words to read memory. {{{ @ }}} (called FETCH) reads a 16bit value from a memory location and places the value on the stack. {{{ C@ }}} (called C-FETCH) reads a 8bit value (a byte).

Both words need (=consume) the address on the stack.

In the Atari, Memory location 632/~$278 is the shadow register for the first joystick port (PORTA/54016).
So the above BASIC example would be in FORTH:

{{{

&632 C@
DUP 15 = IF ." centered " THEN
DUP 14 = IF ." up " THEN
    13 = IF ." down " THEN
    
}}}

!!Writing memory locations

The counterpart to @ (FETCH) and C@ (C-FETCH) are ! (STORE) and C! (C-STORE). These words take a value and an address from the stack and store the value at the address. The Stack comments for this words are:

{{{
!   ( 16b addr -- )
C!  (  8b addr -- )
}}

The below BASIC line changes the background color of the screen to black, writing the value 0 in memory location 709 (COLOR1):

{{{
100 POKE 709,0
}}}

In Forth, we write
{{{
0 709 C!
}}}