{{{
From: wmb@MITCH.ENG.SUN.COM
Newsgroups: comp.lang.forth
Subject: Forth memory allocator
Message-ID: <9008101347.AA02701@ucbvax.Berkeley.EDU>
Date: 10 Aug 90 00:08:09 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: wmb%MITCH.ENG.SUN.COM@SCFVM.GSFC.NASA.GOV
Organization: The Internet
}}}
> In a similar vein, does anyone have a forth memory allocator/freeer?
Here's a pretty good memory allocator that Don Hopkins and I wrote.
I'm using it in production code, so it should be pretty solid by now.
It strikes a reasonable balance between speed of allocation, speed of
freeing, resistance to fragmentation, and ability to allocate arbitrary
size pieces.
Enjoy,
Mitch Bradley
{{{
\ Forth dynamic storage managment.
\ Implementation of the ANS Forth BASIS 11 memory allocation wordset.
\
\ By Don Hopkins, University of Maryland (now at Sun Microsystems)
\ Heavily modified by Mitch Bradley, Bradley Forthware
\ Public Domain.
\ Feel free to include this in any program you wish, including
\ commercial programs and systems, but please give us credit.
\
\ First fit storage allocation of blocks of varying size.
\ Blocks are prefixed with a usage flag and a length count.
\ Free blocks are collapsed downwards during free-memory and while
\ searching during allocate-memory. Based on the algorithm described
\ in Knuth's _An_Introduction_To_Data_Structures_With_Applications_,
\ sections 5-6.2 and 5-6.3, pp. 501-511.
\
\ In the following stack diagrams, "ior" signifies a non-zero error code.
\
\ init-allocator ( -- )
\ Initializes the allocator, with no memory. Should be executed once,
\ before any other allocation operations are attempted.
\
\ add-memory ( adr len -- )
\ Adds a region of memory to the allocation pool. That memory will
\ be available for subsequent use by allocate and resize. add-memory may
\ be executed any number of times.
\
\ allocate ( size -- ior | adr 0 )
\ Tries to allocate a chunk of memory at least size bytes long.
\ Returns nonzero error code on failure, or the address of the
\ first byte of usable data and 0 on success.
\
\ free ( adr -- ior | 0 )
\ Frees a chunk of memory allocated by allocate or resize. adr is an
\ address previously returned by allocate or resize. Error if adr is
\ not a valid address.
\
\ resize ( adr1 len -- adr1 ior | adr2 0 )
\ Changes the size of the previously-allocated memory region
\ whose address is adr1. len is the new size. adr2 is the
\ address of a new region of memory of the requested size, containing
\ the same bytes as the old region.
\
\ available ( -- size )
\ Returns the size in bytes of the largest contiguous chunk of memory
\ that can be allocated by allocate or resize .
8 constant #dalign \ Machine-dependent worst-case alignment boundary
2 base !
1110000000000111 constant *dbuf-free*
1111010101011111 constant *dbuf-used*
decimal
: field \ name ( offset size -- offset' )
create over , + does> @ +
;
struct
/n field .dbuf-flag
/n field .dbuf-size
aligned
0 field .dbuf-data
/n field .dbuf-suc
/n field .dbuf-pred
constant dbuf-min
dbuf-min buffer: dbuf-head
: >dbuf ( data-adr -- node ) 0 .dbuf-data - ;
: dbuf-flag! ( flag node -- ) .dbuf-flag ! ;
: dbuf-flag@ ( node -- flag ) .dbuf-flag @ ;
: dbuf-size! ( size node -- ) .dbuf-size ! ;
: dbuf-size@ ( node -- size ) .dbuf-size @ ;
: dbuf-suc! ( suc node -- ) .dbuf-suc ! ;
: dbuf-suc@ ( node -- node ) .dbuf-suc @ ;
: dbuf-pred! ( pred node -- ) .dbuf-pred ! ;
: dbuf-pred@ ( node -- node ) .dbuf-pred @ ;
: next-dbuf ( node -- next-node ) dup dbuf-size@ + ;
\ Insert new-node into doubly-linked list after old-node
: insert-after ( new-node old-node -- )
>r r@ dbuf-suc@ over dbuf-suc! \ old's suc is now new's suc
dup r@ dbuf-suc! \ new is now old's suc
r> over dbuf-pred! \ old is now new's pred
dup dbuf-suc@ dbuf-pred! \ new is now new's suc's pred
;
: link-with-free ( node -- )
*dbuf-free* over dbuf-flag! \ Set node status to "free"
dbuf-head insert-after \ Insert in list after head node
;
\ Remove node from doubly-linked list
: remove-node ( node -- )
dup dbuf-pred@ over dbuf-suc@ dbuf-pred!
dup dbuf-suc@ swap dbuf-pred@ dbuf-suc!
;
\ Collapse the next node into the current node
: merge-with-next ( node -- )
dup next-dbuf dup remove-node ( node next-node ) \ Off of free list
over dbuf-size@ swap dbuf-size@ + rot dbuf-size! \ Increase size
;
\ node is a free node. Merge all free nodes immediately following
\ into the node.
: merge-down ( node -- node )
begin
dup next-dbuf dbuf-flag@ *dbuf-free* =
while
dup merge-with-next
repeat
;
\ The following words form the interface to the memory
\ allocator. Preceding words are implementation words
\ only and should not be used by applications.
: msize ( adr -- count ) >dbuf dbuf-size@ >dbuf ;
: free ( adr -- ior | 0 )
>dbuf ( node )
dup dbuf-flag@ *dbuf-used* <> if
-1
else
merge-down link-with-free 0
then
;
: add-memory ( adr len -- )
\ Align the starting address to a "worst-case" boundary. This helps
\ guarantee that allocated data areas will be on a "worst-case"
\ alignment boundary.
swap dup #dalign round-up ( len adr adr' )
dup rot - ( len adr' diff )
rot swap - ( adr' len' )
\ Set size and flags fields for first piece
\ Subtract off the size of one node header, because we carve out
\ a node header from the end of the piece to use as a "stopper".
\ That "stopper" is marked "used", and prevents merge-down from
\ trying to merge past the end of the piece.
>dbuf ( first-node first-node-size )
\ Ensure that the piece is big enough to be useable.
\ A piece of size dbuf-min (after having subtracted off the "stopper"
\ header) is barely useable, because the space used by the free list
\ links can be used as the data space.
dup dbuf-min < abort" add-memory: piece too small"
\ Set the size and flag for the new free piece
*dbuf-free* 2 pick dbuf-flag! ( first-node first-node-size )
2dup swap dbuf-size! ( first-node first-node-size )
\ Create the "stopper" header
\ XXX The stopper piece should be linked into a piece list,
\ and the flags should be set to a different value. The size
\ field should indicate the total size for this piece.
\ The piece list should be consulted when adding memory, and
\ if there is a piece immediately following the new piece, they
\ should be merged.
over + ( first-node first-node-limit )
*dbuf-used* swap dbuf-flag! ( first-node )
link-with-free
;
: allocate ( size -- ior | adr 0 )
\ Keep pieces aligned on "worst-case" hardware boundaries
#dalign round-up ( size' )
.dbuf-data dbuf-min max ( size )
\ Search for a sufficiently-large free piece
dbuf-head ( size node )
begin ( size node )
dbuf-suc@ ( size node )
dup dbuf-head = if \ Bail out if we've already been around
2drop -1 exit ( ior )
then ( size node-successor )
merge-down ( size node )
dup dbuf-size@ ( size node dbuf-size )
2 pick >= ( size node big-enough? )
until ( size node )
dup dbuf-size@ 2 pick - ( size node left-over )
dup dbuf-min <= if \ Too small to fragment?
\ The piece is too small to split, so we just remove the whole
\ thing from the free list.
drop nip ( node )
dup remove-node ( node )
else ( size node left-over )
\ The piece is big enough to split up, so we make the free piece
\ smaller and take the stuff after it as the allocated piece.
2dup swap dbuf-size! ( size node left-over) \ Set frag size
+ ( size node' )
tuck dbuf-size! ( node' )
then
*dbuf-used* over dbuf-flag! \ Mark as used
.dbuf-data 0 ( adr 0 )
;
: available ( -- size )
0 .dbuf-data ( current-largest-size )
dbuf-head ( size node )
begin ( size node )
dbuf-suc@ dup dbuf-head <> ( size node more? )
while \ Go once around the free list
merge-down ( size node )
dup dbuf-size@ ( size node dbuf-size )
rot max swap ( size' node )
repeat
drop >dbuf ( largest-data-size )
;
\ XXX should be smarter about extending or contracting the current piece
\ "in place"
: resize ( adr1 len -- adr1 ior | adr2 0 )
allocate if ( adr1 adr2 )
2dup over msize over msize min move
swap free 0 ( adr2 0 )
else ( adr )
-1 ( adr1 ior )
then
;
\ Head node has 0 size, is not free, and is initially linked to itself
: init-allocator ( -- )
*dbuf-used* dbuf-head dbuf-flag!
0 dbuf-head dbuf-size! \ Must be 0 so the allocator won't find it.
dbuf-head dup dbuf-suc! \ Link to self
dbuf-head dup dbuf-pred!
;
}}}