ACTION! Relocator#

RELGEN.ACT#

The data "
MODULE ;RELGEN.ACT

;COPYRIGHT 1984, QMI, JS DeMar
;REV. 1.1, March 20, 1984

;OBJECT CODE RELOCATION GENERATOR for
;ACTION! compiled binary-load files.

;WARNING!!! This program requires
;four OPEN files simultaneously.
;Be sure that DOS is configured for
;this. With DOS 2.0, set $709 equal
;to at least 4, rewrite DOS and
;reboot.

;Requires the second file compiled
;at any even page increment higher
;than the first file, for example:
;$3000 and $3100.

;Generates a table of the locations
;that require relocating and saves
;it in a ".GEN" file in ACTION!.
;  The ".REL" file is the original
;object code with an origin of "0". 
;The actual relocator is compiled
;from the generic relocator source
;called "RELOC.ACT" merged with the
;".GEN" file generated here. Append
;".REL" file to that code and it
;will load and relocate to MEMLO.

DEFINE in1="1",
       in2="2",
       out1="3",
       out2="4"

BYTE abrt

;---------------------------------

PROC MyError(BYTE a,x,y)

IF y=170 THEN
  PrintE("ERROR File not found!")
ELSE
  Print("ERROR! ")
  PrintBE(y)
FI
abrt=1
RETURN
;---------------------------------

PROC Ferror()

BYTE t,clock=$14

PrintE("ERROR in Output filespec!")
t=clock-$80
DO
UNTIL t=clock
OD
RETURN
;---------------------------------

PROC EndIt()

Close(in1)
Close(in2)
Close(out1)
Close(out2)
RETURN
;---------------------------------

PROC Main()

CARD start1,start2,end1,end2
CARD offsets,offsete,i,count,hits
CARD test1,test2,old1,old2,old3,old0
BYTE x,z,j,wnum,d1,d2,
     sthigh

BYTE ARRAY fname1(18),fname2(18),
           fnameout1(18),fnameout2(18)

DO
PrintE(" Relocation code Generator II   ")
PrintE("0x1D         JS DeMar, 8/84")
PutE()
PrintE("  Requires two code files compiled")
PrintE("      with an offset of $0100.")
PutE()

Print("Filespec for code A >") 
InputMD(device,fname1,18)
PutE()
Print("Filespec for code B >") 
InputMD(device,fname2,18)
PutE()

Scopy(fnameout1,fname1)
SCopy(fnameout2,fnameout1)
j=1
IF fnameout1(1)#'D 
      OR fnameout1(0)<4 THEN
  Ferror()
ELSEIF fnameout1(2)=': THEN
  z=0
ELSEIF fnameout1(3)=': THEN
  z=1
FI
DO 
  x=fnameout1(j)
  j==+1
  IF x=$20 THEN
    EXIT
  ELSEIF x='. THEN
    EXIT
  ELSEIF j>fnameout1(0) THEN
    j==+1
    EXIT
  ELSEIF j>11+z THEN
    Ferror()
  FI
OD

fnameout1(j-1)='.
fnameout1(j)='G
fnameout1(j+1)='E
fnameout1(j+2)='N
fnameout1(0)=j+2

j=1
IF fnameout2(1)#'D 
      OR fnameout2(0)<4 THEN
  Ferror()
ELSEIF fnameout2(2)=': THEN
  z=0
  EXIT
ELSEIF fnameout2(3)=': THEN
  z=1
  EXIT
FI
OD
DO 
  x=fnameout2(j)
  j==+1
  IF x=$20 THEN
    EXIT
  ELSEIF x='. THEN
    EXIT
  ELSEIF j>fnameout2(0) THEN
    j==+1
    EXIT
  ELSEIF j>11+z THEN
    Ferror()
    EXIT
  FI
OD

fnameout2(j-1)='.
fnameout2(j)='R
fnameout2(j+1)='E
fnameout2(j+2)='L
fnameout2(0)=j+2

Print("Generation file = ")
PrintE(fnameout1)
Print("Relocation file = ")
PrintE(fnameout2)

Error=MyError
abrt=0
Close(in1)
Close(in2)
Close(out1)
Close(out2)
Open(in1,fname1,4)
Open(in2,fname2,4)
IF abrt=1 THEN 
  Close(1)
  Close(2)
  RETURN
FI
Open(out1,fnameout1,8)
Open(out2,fnameout2,8)

x=GetD(in1) ;throw away two $FF's.
x=GetD(in1)
PutD(out2,$FF)
PutD(out2,$FF)
x=GetD(in1)
PutD(out2,x)
start1=x    ;start addr of file1.
x=GetD(in1)
PutD(out2,x)
start1==+(x*256)
x=GetD(in1)
PutD(out2,x)
end1=x
x=GetD(in1)
PutD(out2,x)
end1==+(x*256) ;end addr of file1.

x=GetD(in2) ;throw away two $FF's.
x=GetD(in2)
x=GetD(in2)
start2=x    ;start addr of file2.
x=GetD(in2)
start2==+(x*256)
x=GetD(in2)
end2=x
x=GetD(in2)
end2==+(x*256) ;end addr of file2.

offsets=start2-start1
sthigh=start1/256
offsete=end2-end1


PrintDE(out1,"MODULE")
PrintD(out1,";For file ")
PrintDE(out1,fnameout2)
PrintDE(out1,"")
Print("Code starts at ")
PrintD(out1,"CARD start=[")
PrintCE(start1)
PrintCD(out1,start1)
PrintDE(out1,"]")
Print("   and ends at ")
PrintD(out1,"CARD finish=[")
PrintCE(end1)
PrintCD(out1,end1)
PrintDE(out1,"]")
Print("Compile offset was ")
PrintCE(offsets)

IF offsete#offsets THEN
  PrintE("Diferrent size files!")
  PrintE("ABORTED!")
  EndIt()
  RETURN
FI
PrintDE(out1,"")
PrintD(out1,"CARD ARRAY otable=[")
wnum=0
hits=0
count=0
FOR i=start1 TO end1
DO
  d1=GetD(in1)
  d2=GetD(in2)
  IF d1#d2 THEN
    hits==+1
    IF wnum=0 THEN
      PrintD(out1,"  ")
      Print(" ")
    ElSE 
      PrintD(out1," ")
      Print(" ")
    FI
    PrintCD(out1,count)
    Print(" ")
    PrintC(count)
    wnum==+1
    IF wnum>4 THEN
      PrintDE(out1,"")
      PrintE("")
      wnum=0
    FI
    d1==-sthigh
  FI
  PutD(out2,d1)
  count==+1
OD
FOR i=0 TO 2 
DO
  d1=GetD(in1)
  d2=GetD(in1)
OD
test1=d1
test1==+(d2*256)
IF test1>=start1 AND test1<=end1 THEN
  PrintDE(out1,"]")
  PrintE("]")
  PrintD(out1,"CARD hits=[")
  PrintCD(out1,hits)
  PrintDE(out1,"]")
  PrintDE(out1,"")
  Print("CARD hits=[")
  PrintC(hits)
  PrintE("]")
  PrintE("")
  PrintD(out1,"CARD runaddr=[")
  Print("CARD runaddr=[")
  test1==-start1
  PrintCD(out1,test1)
  PrintC(test1)
  PrintDE(out1,"]")
  PrintE("]")
ELSE
  PrintE("No Run Address! - ABORTED!")
FI
PrintE("")
PrintDE(out1,"")
EndIt()
PrintE("Finished!"")
RETURN
" is not legal for a JDOM character content: 0x001d is not a legal XML character.

RELOC.ACT#

MODULE ;RELOCATE.ACT

;Run-time Relocator Code.
;For use with RELGEN.ACT
;COPYRIGHT 1984, JS DeMar
;Rev. 2.0, August 17,1984
;---------------------------------

SET 14=$6000
SET $0491=$6000
;---------------------------------
;The beginning of the relocator
;table and code should be higher
;than the end of the original
;compiled program. But, there must
;be enough space left for the table
;and the relocator code itself!
;---------------------------------



;---------------------------------
;Read the ".GEN" file above here.
;---------------------------------
;Compile this after reading in the
;".GEN" file above. Then append this
;code to the ".REL" file using the
;DOS C (COPY) command with /A after
;the filenames:
; PROGRAM.OBJ,PROGRAM.REL/A
;Then rename the ".REL" file to
;AUTORUN.SYS to run at boot-time.
;---------------------------------

PROC Relocate()

BYTE offset,memlohi=$02E8,x,y
CARD memlo=$02E7,i,j,top,entry
CARD POINTER p
BYTE ARRAY newplace

[$8E y $4E y $4E y $4E y $4E y]

newplace=memlo
newplace==&$FF00
offset=memlohi
i=memlo&$00FF
IF i#0 THEN
  newplace==+$0100
  offset==+1
FI

j=0
FOR i=start TO finish
DO
  p=i
  x=p^
  newplace(j)=x
  j==+1
OD

FOR i=0 TO hits-1
DO
  entry=otable(i) 
  newplace(entry)==+offset
OD
runaddr==+newplace
[$6C runaddr]